Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Battery Negative Cable Disconnection and Connection) .
2. Remove the MID-Bussed Electrical Center from the bracket.




3. Disconnect the park brake warning lamp switch connector.




4. Remove the park brake warning lamp switch mounting bolt.
5. Remove the park brake warning lamp switch.



Installation Procedure





1. Install the park brake warning lamp switch.

Notice: Refer to Fastener Notice .

2. Install the park brake warning lamp switch mounting bolt.

Tighten the bolt to 3 N.m (25 lb in).





3. Connect the park brake warning lamp switch connector.
4. Install the MID-Bussed Electrical Center bracket.
5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Battery Negative Cable Disconnection and Connection) .