Aisin Cooling Fan Motor - Replacement Procedures
88hyundai01Group: ENGINE
Number: 019
Date: MAY, 1988
Model: EXCEL
Subject
AISIN COOLING FAN MOTOR REPLACEMENT
The Excel Hot Weather Cooling Kits, and Excels built from the dates shown below are equipped with Aisin cooling fan motors (P/N 25386-21800). When a new Aisin motor is installed, the wires should exit the motor housing at approximately the 4 o'clock position when viewed from the rear. The wires should then be secured with the retainers that are welded onto the shroud. Failure to orient the motor in this manner may allow water to enter the motor at the wire grommet.
Production Change Effective
Production Date
11/1/87 M/T
12/10/87 A/T
Plus vehicles with hot weather cooling kit