Recall - Hard Start Repair Kit Installation

Group: CAMPAIGN

Number: 94-01-014

Date: NOVEMBER, 1994

Model: 1993 & 1994 ELANTRA

Subject:
REPAIR KIT FOR ENGINE NO-START IN EXTREME COLD TEMPERATURES CAMPAIGN (909)

DESCRIPTION:

Some Elantra 1.8L DOHO engines may be difficult to start during extremely cold (below 10°F) temperatures. In order to improve this condition, a repair kit has been developed.





PARTS INFORMATION





NOTE:
A repair kit contains a modulator, extension harness, adapter and 2 straps as shown in the illustration





REPAIR KIT INSTALLATION LAY-OUT

SERVICE PROCEDURES:





1. Record the customer's pre-set radio stations.

Turn off the ignition key and disconnect the battery negative terminal.





2. Remove the driver's side of the lower crash pad.





3. Remove the control relay.





4. Remove the relay box.





5. Remove the ECM protector.

6. Disconnect the ECM connectors from the ECM.





7. Strap the modulator and the extension harness together as shown in the illustration.





8. Peel the protective covers off the two sided tapes on the surface of the adapter and attach the adapter to the ECM as shown in the diagram





9. Connect the extension harness connectors (red-taped side) to the ECM and the control harness connectors to the adapter of the repair kit.

10. Strap the extension harness, control harness and the adapter together as shown in the illustration.





11. Re-install the relay box and control relay.

12. Re-install the lower side of the crash pad.

13. Re-connect the battery negative terminal and start the engine to check if the connection is complete. Re-set the customer's pre-set radio stations and clock.





CAMPAIGN CLAIM INFORMATION