Inspection Procedure

INSPECTION PROCEDURE

INSPECTION USING SCAN TOOL
Check Conditions/Normal Value
Accelerator completely closed. / 0.5-0.6 Volts
Accelerator slowly depressed / change according to opening
Accelerator completely open / 4.5-5.5 Volts

Probably Cause Or Remedy
[1][2]Throttle position sensor is correctly adjusted if the voltage is high when fully open and low when fully closed.
[1][2]Throttle position sensor circuit harness malfunction if there is no change.
[1][2]Throttle position sensor or accelerator cable malfunction if the change is not smooth.