CV Joint - Removal Instructions
Group: TRANSAXLENumber: 96-40-014
Date: JULY, 1996
Model: 1996 ELANTRA
Subject:
1996 Elantra CV Joint
Removal Instructions
DESCRIPTION:
Three notches have been added to the left inboard CV joint to aid in its removal from the transaxle case.
REMOVAL PROCEDURE:
1. To remove the left inboard CV joint, rotate it until a notch is visible.
2. Place a pry bar in a notch on the CV joint and pry against the transaxle case to release the CV joint.
CAUTION:
Do not pull on the axle shaft, as this may cause axle boot damage.