Oil Replacement

NOTE: Use HP Gear Oil SAE 75W/85W (API-GL 4)





1. With the vehicle parked on a level surface, remove the drain plug and drain the transaxle oil.
2. Replace the gasket with a new one and install the drain plug.
Drain plug tightening torque: 30-35 Nm (22-25 ft. lbs.).





3. Add new oil through the filler plug, filling to a level 5-9mm (0.2-0.4 inch) below the plug opening.
Transaxle oil total capacity: 2.15 liters (2.27 US qts.).
Filler plug tightening torque: 30-35 Nm (22-25 ft. lbs.).