System Specifications

LUBRICANTS
- MOLYWHITE TA NO. 2 or equivalent used for contact surface of release bearing and fulcrum of clutch release fork, Inner surface of clutch release bearing, inner surface of clutch disc spline, contact portion of release lever to release cylinder push rod and input shaft spline.

- Brake Fluid DOT 3 used for inner surface of clutch release cylinder and outer circumference of piston and cup and inner surface of clutch master cylinder and outer circumference of piston assembly.

- SAE J310a, Wheel Bearing Grease, NLGI No. 2 or equivalent used for clutch master cylinder push rod, clevis pin and washer.

- SAE J310a, Chassis grease, NLGI No. 1 or equivalent used for clutch pedal shaft and bushings.