Operation CHARM: Car repair manuals for everyone.

Blower Motor: Service and Repair

DISASSEMBLY AND REASSEMBLY





COMPONENTS






1. Remove the motor cooling tube from the blower unit.





2. Remove the vacuum motor.
3. Remove the blower upper case assembly from the lower case assembly.





4. Remove the blower resistor.





5. Remove the blower motor assembly from the blower outlet duct assembly.





6. Remove the blower motor cap.





7. Remove the washer clip from the end of the blower motor shaft.





8. Remove the blower fan from the blower motor.
9. Reassembly is the reverse order of disassembly.

INSTALLATION
1. Installation is the reverse order of removal.
2. After installation, evacuate, charge and test the air conditioning system.
3. Check that the temperature control cable slides smoothly, the full stroke right to left. If not okay, readjust the temperature control cable.