Headlamp: Service and Repair

1. Disconnect the battery negative terminal.





2. After loosening the nut, pull out the front combination lamp (turn signal lamp incorporated)





3. Remove the head lamp assembly by loosening the 3 mounting bolts.
4. Disconnect the head lamp connector.
5. Installation is the reverse order of removal.

Tightening torque of head lamp mounting bolt : 3-5 Nm (30-50 kg.cm, 2.2-3.6 lb.ft)

Tightening torque of front combination lamp mounting nut : 0.5-1.0 Nm (5-10 kg.cm, 0.4-0.7 lb.ft)