A/T Torque Data

SERVICE SPECIFICATIONS
Low Reverse Brake:
Snap Ring Clearance 0.975-1.287 mm (0.039-0.050 inch)
Transfer Drive Gear End Play 0-0.06 mm (0-0.0024 inch)
Transfer Idler Gear Preload 0.8 Nm (0.59 ft. lbs.)
Transfer Shaft End Play 0-0.025 mm (0-0.0010 inch)

TIGHTENING SPECIFICATIONS
Bearing Retainer Screw 17-22 Nm (13-15 ft. lbs.)
Detent Spring Bolt 10-12 Nm (90-102 inch lbs.)
Drain Plug 30-35 Nm (22-25 ft. lbs.)
Lock Plate Bolt 48-60 Nm (35-43 ft. lbs.)
Pressure Check Plug 8-10 Nm (72-84 inch lbs.)
Pulse Generator Mounting Bolt 10-12 Nm (90-102 inch lbs.)
Sprag Rod Support Bolt 20-27 Nm (15-19 ft. lbs.)
Transaxle Mounting Bolt:
8 mm (0.31 inch) diameter bolt 30-35 Nm (22-25 ft. lbs.)
10 mm (0.40 inch) diameter bolt 43-55 Nm (32-39 ft. lbs.)
Transfer Shaft Lock Nut 200-230 Nm (145-166 ft. lbs.)
Drive Plate-To-Converter Tightening Bolt 46-53 Nm (34-38 ft. lbs.)