Windows: Service and Repair

REMOVAL AND INSTALLATION
1. Remove the quadrant inner cover.





2. Remove the rear view mirror mounting screws and then remove the rear view mirror.
3. Disconnect the remote control connection.





4. Remove the safety lock knob.
Remove the screws from the door.





5. Insert a screwdriver between the trim fasteners and door panel to pry it loose.
Disconnect the connectors. (Power Window Motor, Power Window Main Switch, Door Lock Actuator, Outside Mirror and Trunk Lid Opener Switch)





6. Remove the door trim seal.
7. Detach the regulator assembly.





8. Disconnect the power window motor from the regulator assembly.

CAUTION: When loosening the mounting screws of the regulator and the motor assembly, the compressed force of the regulator spring may cause the regulator arm to spring up.





9. Installation is the reverse order of removal.

CAUTION: When installing the door trim seal, butyl tape should not be placed over door trim fastener mounting area.