Intermediate Shaft, M/T

SERVICE SPECIFICATIONS
End Play:
Front Bearing:
KM 210 0.01T-0.11L (0.0004T-0.0044L inch)
Standard 0.05T-0.10T mm (0.002T-0.0039T inch)
Rear Bearing 0.05T-0.10T mm (0.002T-0.0039T inch)

NOTE:
- T indicates tightening of - (minus) direction of endplay.
- L Indicates loosening of + (plus) direction of endplay.

TIGHTENING SPECIFICATIONS
Lock Nut 140-160 Nm (102-115 ft. lbs.)