Engine Controls

Part 1 of 4




Part 2 of 4




Part 3 of 4




Part 4 of 4

NOTE
(1) Do not replace the Engine Control Module (ECM) until a thorough terminal check reveals there are no short/open circuits.
(2) After the ECM detects a malfunction, a diagnostic trouble code is recorded when the engine is next started and the same malfunction is re-detected. However, for items marked with a "*",the diagnostic trouble code is recorded on the first detection of the malfunction.
(3) 02 : Heated oxygen sensor
(4) Sensor 1 : Indicates sensors which are mounted closest to the engine.
(5) Sensor 2 : Indicates sensors which are mounted next closest to the engine.