Brake Pedal Assy: Adjustments

1. Pedal height





Pedal height (from top of pedal to toeboard) "A":
176.0 mm (6.93 inch) - 181 mm (7.13 inch)
If the pedal height is out of specification, adjust using the following procedure:
1) Back off the stop lamp switch to a position where it does not contact the pedal arm.
2) Turn the stop lamp switch until the clearance between the stop lamp switch outer case and pedal arm reaches the standard value, and secure the stop lamp switch with the lock nut.





Free play of brake pedal "B":
0.5 - 1.0 mm (0.02 - 0.039 inch)
2. Free play of brake pedal.





Pedal to floor board clearance C:
6 - 13 mm (0.236 - 0.512 inch)
3. Start the engine, apply the brake pedal with approximately 500 N (50 kg, 110 lbs) of force, and measure the clearance between the brake pedal and the floor board.





Pedal to floor board clearance "D":
When pedal is depressed 50 kg (110 lbs.) force
75 mm (2.95 inch) or more
When pedal is fully depressed without brake fluid
35 mm (1.378 inch) or more