General Torque Specifications

Tightening Specifications (Part 1 Of 3):

Tightening Specifications (Part 2 Of 3):

Tightening Specifications (Part 3 Of 3):

Drive Plate-To-Converter (Flex Plate) Tightening Bolt 46 - 53 Nm (34 - 38 ft. lbs.)

TIGHTENING SPECIFICATIONS

Flywheel Bolts 130 - 140 Nm (94 - 101 ft. lbs.)

Main Bearing Cap Bolts 65-70 Nm (650-700 kg. cm, 47-51 ft. lbs.)

NOTE:
- Using a sequence of center cap, No.2 cap, No.4 cap, front cap and rear cap.
- Cap bolts should be tightened evenly in 4 to 5 stages before they are tightened to specified torque.