Trailing Arm: Service and Repair

REMOVAL
1. Raise the vehicle and remove the wheel.





2. Remove the ABS wheel sensor from the knuckle.
3. Remove the rear brake assembly from the knuckle and suspend it with a wire.

CAUTION: Brake hose does not need to be disconnected from brake caliper, Be careful not to depress brake pedal, otherwise, piston will pop out.





4. Remove the knuckle from the strut assembly.
5. Remove the rear suspension arm and trailing arm mounting bolts from the rear axle carrier.





6. Remove the rear suspension arm and trailing arm mounting bolts from the rear axle carrier.





7. Remove the trailing arm and suspension arm from the vehicle.

INSPECTION
1. Check the bushing for wear and deterioration.
2. Check the upper arm or lower arm or assist link for bend or breakage.
3. Check all bolts for condition and straightness.