Compressor HVAC: Testing and Inspection

The oil used to lubricate the compressor circulates in the system while the compressor is operating. Whenever replacing any component of the system or when a large amount of gas leakage occurs, add oil to maintain the original total amount of oil.

Total amount of oil in the system: 150 cc (9.1 fl.oz)

HANDLING OF OIL
1. The oil should be free from moisture, dust, metal filings, etc.
2. Do not mix oils.
3. The moisture content in the oil increases when exposed to the air for prolonged periods. After use, seal the container immediately.

ADDING OIL FOR REPLACEMENT COMPONENT PARTS




When replacing the system's component parts, be sure to add the following amount of oil to the parts being replaced.