Disassembly and Reassembly
DISASSEMBLYIf the disassembly procedure is complex, requiring many parts to be disassembled, all parts should be disassembled in a way that will not affect their performance or external appearance.
1. Inspecting Parts
When moved, each part should be carefully inspected for malfunction, deformation, damage and other problems.
2. Arrangement of Parts
All disassembled parts should be carefully arranged for reassembly.
Be sure to separate or otherwise identify the parts to be replaced from those that will be reused.
3. Cleaning Parts for reuse
All parts to be reused should be carefully and thoroughly cleaned in the appropriate method.
PARTS
When replacing parts, use HYUNDAI genuine parts.
REASSEMBLY
Standard values, such as torques and certain adjustments, must be strictly observed when reassembling all parts.
If removed, replace the following parts with new ones.
1. Oil seals
2. Gaskets
3. O-rings
4. Lockwashers
5. Cotter pins (split pins)
6. Nylon nuts
Depending on their location
1. Sealant should be applied to gaskets.
2. Oil should be applied to the moving components of parts.
3. Specified oil or grease should be applied at the prescribed locations (oil seals, etc.) before assembling.