With Manufacturer's Scan Tool

NOTE: HYUNDAI does not provide a procedure to retrieve SRS diagnostic trouble codes without a scan tool.

DIAGNOSIS WITH SCAN TOOL




CHECK PROCEDURES
1. Connect the Hi-Scan Pro DLC to the vehicle data link connector located at underneath the dash panel.
2. Turn the ignition key to "ON" position and turn Hi-Scan Pro on.
3. Perform the SRS diagnosis according to the vehicle model configuration.
4. If a fault code is assured, then replace the component. Never attempt to repair the component.
5. If the Hi-Scan Pro finds that a component of the system is faulty, there is a possibility that the fault is in SRS wiring or connector not on the component.