General Information

Traction Control System
C1610 CAN Bus off failure - General Information

Component Location





General Description

CAN communication is applied just for FTCSs( Full Traction Control Systems) installed in the vehicle for sending requirement data, such as Torque reduction, the number of fuel cut cylinders, and TCS control requests, to the Engine ECM & TCM. The Engine ECM performs fuel cut functions according to requests from the ABS ECU and retards ignition timing by torque reduction requests. The TCM maintains current gear positions during TCS control time, by not increasing power which causes a Kickdown shift.

DTC Description

The HECU checks the CAN communication lines for normal TCS control, and sets this code if CAN BUS OFF status is detected for more than 100ms.

DTC Detecting Condition





Schematic Diagram





Full Circuit