Mechanical Specifications

SPECIFICATIONS(A/T)





Torque converter type 3-element, 1-stage, 2-phase type
Transaxle type 4-speed forward, 1-speed reverse
Engine displacement 2,4 D/2.7 V6
Gear ratio
1st 2.842
2nd 1.529
3rd 1.000
4th 0.712
Reverse 2.480
Final gear ratio 3.770

SERVICE SPECIFICATIONS(A/T)





Output Shaft Preload 0.01 - 0.09 mm
Brake Reaction Plate End Play 0 - 0.16 mm
Low-Reverse Brake End Play 1.35 - 1.81 mm
Second Brake End Play 0.79 - 1.25 mm
Underdrive Sun Gear End Play 0.25 - 0.45 mm
Input Shaft End Play 0.70 - 1.45 mm
Differential Case Preload 0.045 - 0.105 mm
Underdrive Clutch End Play 1.6 - 1.8 mm
Reverse And Overdrive Clutch Return Spring End Play 0 - 0.09 mm
Overdrive Clutch End Play 1.6 - 1.8 mm
Reverse Clutch End Play 1.5 - 1.7 mm
Backlash Between Differential Side Gear And Pinion 0.025 - 0.150 mm

TIGHTENING TORQUE(A/T)





Wiring Harness Bracket 20 - 26 Nm (14 - 18 ft. lbs.)
Control Cable Bracket Bolt 20 -26 Nm (14 - 18 ft. lbs.)
Fluid Temperature Sensor 27 - 33 Nm (19 - 23 ft. lbs.)
Eye Bolt 10 - 12 Nm (7 - 8 ft. lbs.)
Oil Cooler Feed Tube 11 - 13 Nm (8 - 9 ft. lbs.)
Input Shaft Speed Sensor 10 - 12 Nm (7 - 8 ft. lbs.)
Output Shaft Speed Sensor 18 - 25 Nm (13 - 18 ft. lbs.)
Manual Control Lever 10 - 12 Nm (7 - 8 ft. lbs.)
Transaxle Range Switch 4 - 6 Nm (3 - 4 ft. lbs.)
Speedometer Gear 8 - 10 Nm (6 - 7 ft. lbs.)
Valve Body Cover 10 - 12 Nm (7 - 8 ft. lbs.)
Valve Body Mounting Bolt 10 - 12 Nm (7 - 8 ft. lbs.)
Manual Control Shaft Detent 5 - 7 Nm (4 - 5 ft. lbs.)
Rear Cover 20 - 26 Nm (14 - 18 ft. lbs.)
Torque Converter Housing 42 - 54 Nm (29 - 38 ft. lbs.)
Oil Pump 20 - 26 Nm (14 - 18 ft. lbs.)
Transfer Drive Gear 6 - 22 Nm (11 - 15 ft. lbs.)
Output Shaft Lock Nut 160 - 180 Nm (110 - 126 ft. lbs.)
Output Shaft Bearing Retainer 20 - 26 Nm (14 - 18 ft. lbs.)
Oil Filler Plug 29 - 34 Nm (20 - 24 ft. lbs.)
Oil Drain Plug 29 - 34 Nm (20 - 24 ft. lbs.)
Transfer Drive Gear Lock Nut 180 - 210 Nm (126 - 147 ft. lbs.)
Differential Drive Gear To Subframe Bolts 130 - 140 Nm (91 - 98 ft. lbs.)
Valve Body 10 - 12 Nm (7 - 8 ft. lbs.)
Solenoid Valve Support 5 - 7 Nm (4 - 5 ft. lbs.)
Plate 5 - 7 Nm (4 - 5 ft. lbs.)
Pressure Check Plug 8 - 10 Nm (6 - 7 ft. lbs.)
Front Roll Stopper Bracket To Subframe Bolts 60 - 80 Nm (43 - 58 ft. lbs.)
Front Roll Stopper Insulator Bolt And Nut 50 - 65 Nm (36 - 47 ft. lbs.)
Front Roll Stopper Bracket To Transaxle Bolts 60 - 80 Nm (43 - 58 ft. lbs.)
Rear Roll Stopper Bracket 50 - 65 Nm (36 - 47 ft. lbs.)
Rear Roll Stopper Insulator Bolt And Nut 50 - 60 Nm (36 - 47 ft. lbs.)
Rear Roll Stopper Bracket To Transaxle Bolts 60 - 80 Nm (43 - 58 ft. lbs.)
Transaxle Mounting Sub Bracket Nut 60 - 80 Nm (43 - 58 ft. lbs.)
Transaxle Mounting Bracket Bolts 60 - 80 Nm (43 - 58 ft. lbs.)
Transaxle Mounting Insulator Bolt 90 - 110 Nm (65 - 80 ft. lbs.)





LUBRICATIONS(A/T)





SEALANTS(A/T)

SNAP RING FOR ADJUSTMENT AND SPACER(A/T)





1 of 3





2 of 3





3 of 3