Power Outside Mirrors

Circuit Description

Without IMS
The operation of the two outside mirrors is controlled by the power outside mirror switch in the driver door module. Each mirror has two reversible motors: One motor moves the mirror up and down, the other motor moves the mirror left and right. The master selector switch in power door mirror control switch directs battery voltage to the right or left outside mirror.

With the ignition switch in ACC or ON, battery voltage is applied from fuse 16 to the power door mirror switch. With the master selector switch in LEFT and the up/down switch in UP, battery voltage is applied to the left power mirror up/down motor through the driver door module. In the DOWN position, battery voltage and ground are applied to the opposite sides of the motor through the driver door module.

The left/right switch works similarly to the up/down switch. With the master selector switch in the RIGHT position, battery voltage and ground are applied to the right power mirror motors through the assister door module which then operate in a similar way.

With IMS
The power outside mirrors can be controlled by manual switch. In this case, the operations of the power outside mirrors are same as that of the normal(without IMS) power outside mirrors. If the position of the outside mirrors are adjusted and memorized in the IMS control module, power outside mirrors can be operated automatically. When the ignition switch in ON and "1" or "2" button pushed, the memorized position is adjusted automatically.