Hydraulic Pressure Test
HYDRAULIC PRESSURE TEST1. Warm up the engine until the automatic transaxle fluid temperature is 80-1 100°C (176-212 °F).
2. Jack up the vehicle so that the wheels are free to turn.
3. Connect the engine tachometer.
4. Connect the oil pressure gauge(09452-21500) and the oil pressure gauge adapter (09452-21002.9452 21001) to each pressure discharge port. But use the gauge (30kg/cm2) when measuring the reverse pressure, front clutch pressure and low & reverse brake pressure.
5. If a value is outside the standard range, correct the problem while referring to the hydraulic pressure test diagnosis table.
STANDARD HYDRAULIC PRESSURE TEST:
