Symptom Related Diagnostic Procedures

Troubleshooting

Description

Checking Of Short Or Open Circuit
Refer to the following tips for checking of short or open circuit.
1. Shorting bar is located between the upper and lower pins of SRSCM connector A and B.
2. When checking the short circuit shorting bar must be opened. Use a plastic clip to put into as a shorting bar opener for disconnecting shorting bar.
3. Use SST Dummy adapter (0957A-1C000) to measure resistance or voltage for checking of short or open circuit.
Plug it into DAB (CAB, BPT) connector to avoid enlarging or damaging the connector pins.