Control Module: Service and Repair

Removal

1. Disconnect (-) terminal from the battery.

NOTE:
The battery is placed right side of the temporary tire in the trunk.




2. Remove the plastic cover (A) from the driver's side of the engine room.




3. Disconnect the connectors (A) of ECU and TCU.




4. Remove the ECU and TCU with the bracket (B) by removing the four bolts and the nut.
5. Remove the TCU (A) from the ECU by removing the four bolts.






Installation

1. Install the TCU (A) to the ECU by tightening the four bolts.




2. Install the ECU and TCU with the bracket (B) by tightening the four bolts and the nut.




3. Connect the connectors (A) of ECU and TCU.
4. Install the plastic cover (A) to the driver's side of the engine room.




5. Connect (-) terminal to the battery.

NOTE:
The battery is placed right side of the temporary tire in the trunk.