Monitor Scantool data

Brake

ABS/ESC - C1261 Steering Angle Sensor Not Calibrated - Monitor Scantool data

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Ignition "ON" & Engine "ON".
3. Turn the steering wheel to the left or right until can't turn the steering wheel any more.
4. Monitor the "steering sensor" parameters on the Scantool.




Fig 1) Test Condition : Ignition "ON" & Engine "ON".
Normal data (Right side)
Fig 2) Test Condition : Ignition "ON" & Engine "ON".
Normal data (Left side)
5. Is parameter displayed within specifications?