Monitor Scantool data

Brake

ABS/ESC - C1503 TCS/ESP Switch error - Monitor Scantool data

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Ignition "ON" & Engine "OFF".
3. Press the ESC SWITCH.
4. Monitor the "ESC OFF SWITCH" parameter on the scantool.




Fig 1) Test Condition : Ignition "ON" & Engine "OFF".
Normal data
5. Whenever the switch is pushed up/down, is the ESC off switch's scantool data changed ON/OFF?