Door Module Assembly Replacement

Replacements

Door Module Assembly Replacement
1. Remove the following parts:
A. Door trim
B. Window glass
C. Outside handle
2. Loosen the mounting screw (A).




3. Loosen the door module mounting bolts, then remove the door module (A).




4. Loosen the door module mounting bolts, then remove the door module (A).
5. Disconnect the door module wiring harness (B), remove the module assembly.




6. Installation is the reverse of removal.

NOTE:
- The area of whole parts should be applied with sufficient grease.
- Make sure connected are connected properly properly and each rod is connected securely.
- Make sure door lock operates and door open/closes properly.