Verification of Vehicle Repair

Brake

ABS/ESC - C1211 Wheel Speed Sensor Rear-RH Invalid/no Signal Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode
2. Using a scantool, Clear DTC.
3. Operate the vehicle within DTC Detecting Condition in General Information. (Start and drive vehicle in gear and maintain vehicle speed is approx. 50 km/h or more (31 mph or more))
4. Are any DTCs present?