Component Inspection

Engine

Engine Control - P0315 Crankshaft Position System Variation Not Learned Component Inspection

Component Inspection

TEC (Tooth Error Correction) Learning
1. Perform TEC Learning according to as follow.
** TEC Learning method.
- TEC Learning will be completed when maintain fuel cut in a range of over 2,000 rpm for more than 10 sec.
2. Start the engine.
3. Operate the vehicle within DTC Detecting Condition in General Information.
4. Has the same DTC been found?





Visually check CKPS and target wheel
1. IG "OFF".
2. Visually check CKPS is loosened or target wheel is deformed or damaged.
3. Is the above items normal?