Scantool Diagnostics

Adaptive Front Lighting System
B1303 Accelerator Pedal Position Signal Error - Scantool Diagnostics

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. IG KEY "ON" & ENG "OFF".
3. Monitor the "TPS" parameters on the scantool. (ECM's current data)

Specification : APS 1 : 0 V ~ 5 V (APS 2: 0 V~2.5 V)




Fig.1) ENG "ON" - ECM's Current Data (Accelerator pedal signal)
4. Is parameter displayed within specifications?