General Information

Assist Door Module
B1912 Outside Mirror - Right horizontal Motor or Sensor - General Information

Component Location





General Description

R/H Mirror is controlled by pressing direction switch (UP, DOWN, LEFT, RIGHT) with IG ON after R/H Mirror is selected by Power Window Main Switch.

DTC Description

Case1 : ADM sets DTC when the change value of assist mirror position is less than 0.1 V for 5 sec while it is not reached to the aimed position.
Case2 : ADM sets DTC when there is counter-direction output which is 0.25 V and above while assist mirror is turning to one direction.
Case3 : ADM sets DTC when there is no movement signal from positioning sensor in assist mirror.

DTC Detecting Condition





Diagnostic Circuit Diagram





Signal Waveform & Data








Fig.1) The maximum value at left side end position.
Fig.2) The maximum value at right side end position.