Scantool Diagnostics

Power Seat Module
B1996 Headrest Auto Adjust Error - Scantool Diagnostics

Monitor Scantool Data

Headrest Auto Adjust setting
1. Connect scantool to Data Link Connector (DLC).
2. IG "ON" & Engine "OFF".
3. Select "Headrest Auto Adjust setting" in Inspection / Test option.
4. Start Headrest Auto Adjust setting.








Fig.1) Start "Headrest Auto Adjust setting" in Inspection / Test option during IG ON
Fig.2) Headrest Auto Adjust setting completed
5. Is Headrest Auto Adjust setting completed?