Scantool Diagnostics

ESP (CTC)
C1211 Wheel Speed Sensor Rear-RH Invalid/no Signal - Scantool Diagnostics

Monitor GDS Data

1. Start engine.
2. Connect GDS to Data Link Connector (DLC).
3. Drive vehicle in gear and maintain vehicle speed at or above 10 km/h. (6.2 mph)
4. Monitor the "WHEEL SPEED (Rear-Right)" parameter on the GDS.

Specification : Compare with other service data related to wheel speed sensor.
If it is the same as other service data, it is in normal condition.

5. Is the service data displayed within specifications?