Scantool Diagnostics

Tire Pressure Monitoring
C2510 TREAD LAMP open/short circuit - Scantool Diagnostics

Monitor Scantool Data

1. Park the vehicle on an even ground.
2. Connect scantool to Data Link Connector (DLC).
3. IG "ON"
4. Operate "TPMS Tread Lamp" item of the Actuation Test by force.

Specification : The Tread Lamp blinks.




Fig.1) Displayed data when the "Tread Lamp" blinks by force.
5. Is the service data shown normally?