General Information

Engine Control
P0390 Camshaft Position Sensor 'B' Circuit (Bank 2) - General Information

Component Location





General Description

The Camshaft Position Sensor (CMPS) is a sensor that detects the compression TDC of the NO. 1 cylinder. The CMPS consists of a hall type sensor and a target on the end of the intake camshaft. When the target triggers the sensor, the sensor voltage is 5 V. If not, the sensor voltage is 0 V. These CMPS signal is sent to the ECM and the ECM uses the CMPS signal for synchronizing the firing of sequential fuel injectors.

DTC Description

If signal input phase is abnormal, ECM sets DTC P0390.

DTC Detecting Condition





Diagnostic Circuit Diagram





Signal Waveform & Data




Fig 1) Normal waveform of CKPS & EX-CMPS Bank 2 at idle.