General Information

Automatic Transaxle
P0706 Transmission Range Sensor Circuit Range/Performance - General Information

Component Location





General Description

Conversion of linear shift valve or parking lock movement into a parallel coded signal on 4 wires (L1, L2, L3, L4) in accordance with the position P, R, N, D, 3, 2, and P_on and P_off (parking lock engaged/disengaged).





P, R, N, D : shift range
L : 4 Tracks
0 : Electric high
1 : Electric low
Z : Intermediate position.

DTC Description

TCM set this code If detected ground short for IC circuit of Inhibitor s/w. (MIL ON : 2 driving Cycle)

DTC Detecting Condition





CAUTION :
1. The function with the higher priority will always take precedence. However, a low-priority is not overruled by a higher priority function.
2. Functions from different priority categories can also run in parallel. It is important to note which function will take precedence in this case.
3. In such an event it is possible for a substitute function with low priority not be carried out if a second, higher-priority function is present. This has been taken into account when compiling the priority list and is international.
4. The mechanical emergency run function must always have the highest priority, since from the electrical standpoint it is the only safe condition.

Signal Waveform & Data
















Fig 1) Inhibitor status at P range
Fig 2) Inhibitor status at R range
Fig 3) Inhibitor status at N range
Fig 4) Inhibitor status at D1 range