Scantool Diagnostics

Automatic Transaxle
P0732 Gear 2 Incorrect Ratio - Scantool Diagnostics

Monitor Scantool Data

1. Connect scan tool to data link connector (DLC), Ignition "ON"
2. Erase DTC and Engine "ON"
3. Monitor the "Current Gear, Target Gear, solenoid valves" parameter on the scan tool.
4. Select "D" range and Drive vehicle, confirm output data of solenoid valves.
Solenoid valve operating status according to gear position





-O- : variable control












Fig 1) Solenoid valves in 2nd gear
Fig 2) Solenoid valves in 2nd gear-graph
Fig 3) Solenoid operating status - down shift 3rd to 2nd gear
5. Does solenoid valves "1" & "3" operated normally?