Exterior Moulding / Trim: Service and Repair

Replacement

Roof Rack Replacement

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Using a screwdriver or remover, remove the roof rack caps (D).
2. Using a screwdriver or remover, remove the front roof rack cover (C) and rear roof rack cover (B).
3. After loosening the mounting nuts, then remove the roof rack assembly (A).
4. Installation is the reverse of removal.





Front Mud Guard And Wheel Guard

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the wheel guard (A) and mud guard (B).




2. Installation is the reverse of removal.

Rear Mud Guard And Wheel Guard

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the wheel guard (A) and mud guard (B).




2. Installation is the reverse of removal.

Tailgate Garnish Replacement
1. Remove the tailgate trim.
2. Disconnect the connector (A).




3. Remove the tailgate garnish (A).




4. Installation is the reverse of removal.