Repair Procedures

Removal

AFLS Unit
1. Disconnect the negative (-) battery terminal.
2. Remove the glove box housing (A).




3. Disconnect the glove box housing connector (A).




4. Remove the DIS head unit.
5. Remove the USB interface unit.
6. Remove the front/rear parking assist system unit.
7. Remove the AFLS unit(A) after removing connector and nuts(2EA).






Installation

AFLS Unit
1. Install the AFLS unit after connecting the connector.
2. Install the front/rear parking assist system unit.
3. Install the USB interface unit.
4. Install the DIS head unit.
5. Install the glove box housing.
6. Connect the negative (-) battery terminal.