Windshield Deicer Switch

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel (A).





3. Remove the center fascia (A) panel.




4. Remove the connectors (A).




5. Remove the screws and heater control unit keyboard (A).






Installation

1. Install the heater control unit keyboard after connecting the connectors.
2. Install the center fascia panel.
3. Install the crash pad lower panel.

Inspection

1. Check IPM input/output specification of windshield deicer switch using the GDS. If the specification is abnormal, replace the windshield deicer switch module.
2. Select option "Input/output monitoring".




3. To check the input value of windshield deicer switch in force mode, select option "Actuation test".