Fuel Pump: Service and Repair

Removal

1. Release the residual pressure in fuel line .
2. Remove the rear seat .
3. Remove the fuel pump service cover (A).




4. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
5. Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D).
6. Remove locking ring (E) by using the service tool.




7. Remove the fuel pump from the fuel tank.






Installation

1. Installation is reverse of removal.

CAUTION:
Be careful of fuel pump direction when installing.
Fuel pump plate cover installation bolt [2DR LEV2]:
2.0 - 3.0 N.m (0.2 - 0.3 kgf.m, 1.4 - 2.2lb-ft)
Fuel Pump Plate Cover Installation [2DR SULEV]:
78.5 - 98.1 N.m (8.0 - 10.0 kgf.m, 57.9 - 72.4lb-ft)