Power Striker

Inspection

Power Trunk Lid Inspection With GDS
1. Check the power trunk module input/output value by using the GDS. If the operation of power trunk module is abnormal, replace power trunk drive unit.
2. To check the DTC of the power trunk module, select "PTM"
3. Select "Input/output monitoring".






Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the trunk trim in the trunk.
3. Disconnect the power striker connector (A).




4. Remove the power striker (A) after removing the screws.






Installation

1. Install the power striker and connector.
2. Install the trunk trim.
3. Connect the negative (-) battery terminal and check the power trunk module correctly.