Repair Procedures

Removal

Audio Head Unit
1. Disconnect the negative (-) battery terminal.
2. Remove the console upper cover(A).




3. Remove the center fascia lower panel(A).





4. Remove the connectors and cables (A).




5. Remove the mounting screws then remove the audio head unit(A).




6. Remove the connectors and cable(A).





Audio Monitor
1. Disconnect the negative (-) battery terminal.
2. Remove the center fascia upper panel (A).





3. Disconnect the connector (A) from external keyboard.




4. Remove the external keyboard (A) after loosening the mounting screws.




5. Remove the audio monitor (A) after loosening the mounting screws.




6. Disconnect the connector (A) from audio monitor.






Disassembly

1. Remove the front panel (A) after loosening the mounting screws.




2. Remove the upper cover (A) after loosening the mounting screws.




3. Remove the CD deck (A) after loosening the mounting screws.






Reassembly

1. Reassemble the deck to the audio unit.
2. Reassemble the upper cover.
3. Reassemble the front panel.
4. Reassemble the audio brackets.

NOTE:
Make sure the film connector and cable jack are plugged in properly.

Installation

Audio Head Unit
1. Connect the audio unit connectors and cables.
2. Install the audio unit.
3. Install the center fascia lower panel.
4. Install the console upper cover.
5. Check the audio system.

NOTE:
Make sure the audio head unit connectors are plugged in properly and the antenna cable is connected properly.

Audio Monitor
1. Install the audio monitor.
2. Install the upper cover and connect the external keyboard connector.
3. Install the center fascia upper panel.