Repair Procedures

Replacement

NOTE:
- Put on gloves to protect your hands.
- Use a plastic panel removal tool to remove interior trim pieces to without marring the surface.
- Take care not bend or scratch the cover and other parts.

1. Loosen the radiator upper cover (A) mounting clips.




2. Remove the front bumper lower mounting clips.




3. After loosening the front bumper side's mounting screw, then disconnect the side's.




4. Disconnect the fog lamp connectors (A).




5. Remove the front bumper cover (A).




6. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damaged clips.