Exterior Moulding / Trim: Service and Repair

Replacement

Front Wheel Guard Replacement

NOTE:
- When prying with a flat-tip screwdriver, wrap with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the front tire.
2. After loosening the mounting clips and screws, then remove the front wheel guard (A).




3. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.

Rear Spoiler Replacement

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the trunk lid trim

2. Disconnect the high mounted stop lamp connector (A).




3. After loosening the mounting nuts, then remove the rear spoiler (A).




4. Installation is the reverse of removal.

NOTE:
- Make sure of connectors is plugged in properly and each rod is connected securely.
- Replace any damaged clips.