Console Lamp: Service and Repair

Inspection

Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.










Removal

1. Disconnect the negative (-) battery terminal.
2. Loosen 2 screws holding the overhead console(A).




3. Disconnect the connectors(A) of sunroof switch then remove the overhead console lamp assembly.




4. Replace the bulb after turning the socket in the conunterclockwise direction.




5. If necessary to replace the bulb(A) only, replace the bulb after opening the overhead console lens.






Installation

1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector.
2. Install the lens.(If lens is removed.)
3. Tighten the screws.