Fog/Driving Lamp: Service and Repair

Inspection

1. Disconnect the negative(-) battery terminal.
2. Remove the lighting switch of the multi-function switch.
3. With the front fog lamp switch, make sure that continuity exists between the terminals below.
If continuity is not as specified, replace the multi-function switch.





Front Fog Lamp






Removal

1. Disconnect the negative (-) battery terminal.
2. Open the front wheel guard service cover (A).




3. Remove the dust cover (A) in the service cover.




4. Replace the front fog bulb turning it in the counterclockwise direction.




5. Remove the front bumper when it need to remove the front fog lamp assembly.

6. Disconnect the front fog lamp connector (A).




7. Remove the front fog lamp assembly (A) after loosening the screws.






Installation

1. Install the front fog bulb and dust cover.
2. Reconnect the lamp connector.
3. Install the front bumper.