Tail Lamp: Service and Repair

Inspection

Stop Lamp Relay
1. Check for continuity between the terminals.














Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the rear combination lamp cover (A).




3. Loosen the rear combination lamp mounting nuts (4EA) and disconnect the connector (A) then remove the rear combination lamp assembly (B).








4. If necessary to replace the bulb, replace the bulb turning the cap in the counter clock-wise direction without removal of rear combination lamp assembly.
A : Back up lamp, B : Turn signal lamp






Installation

1. Install the rear combination lamp assembly after replacing the bulbs.