Repair Procedures

Replacement

Front Seat Belt Replacement

CAUTION:
- When installing the belt, make sure not to damaged the pretensioner.

1. Remove the front seat assembly.

2. Remove the rear seat assembly.

3. Remove the front door scuff trim

4. Remove the front seat belt lower anchor cover (B).
5. After loosening the mounting bolt, then remove the front seat belt lower anchor (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)




6. Remove the cap (B).
7. After loosening the mounting bolt, then remove the rear pillar trim (A).




8. Remove the mounting clips and then center pillar lower trim (A).




9. Remove the front seat belt upper anchor cover (B).
10. After loosening the mounting bolt, then remove the front seat belt upper anchor (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)




11. After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (B), loosen the mounting bolts, then remove the front seat belt pretensioner (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)




12. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damaged clips.

Front Seat Belt Buckle Replacement
1. Remove the front seat assembly.

2. After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




3. Installation is the reverse of removal.